1. CN.HAOSTAR® pipe mill is equipped with four-stage grinding head and four-stage dispersing emulsifier. Six pieces of liquefied fins can run at high speed, which is about three times to five times higher than that of other manufacturers.

2. It is suitable for corrosion-resistant modified white carbon black, carbon black pigment PH4 – 7 and active titanium white PH9 – 11.5 special corrosion-resistant and wear-resistant stainless steel, or alloy steel hard high-hardness colloid grinding head HRC60 and emulsifying fins. The structure is more precise and uniquely designed to make the grinding force stronger and the effect better;

3, has obtained the national patent invention: water-punching cooling mechanical seal device, with unique structure and special materials with independent intellectual property rights to ensure high-speed operation and extended service life three times - five times;

4, Comet CN.HAOSTAR® pipe mill has a pilot-type grinder that is basically the same as a large-scale industrial pipeline type production model;

5. The types of working grinding heads of the pipe mill-grinding pump are the same as the corresponding line speeds;

6. The process parameters do not need to be re-adjusted after industrialization, so the risk of upgrading the machine model to the industrialization process is very low.

7. Pipe grinding This type of equipment is a new kind of high-speed dispersing, mixing, grinding and beating pipe grinding. It can be made into a colloid homogenizing machine such as titanium white liquid material and white carbon black slurry by special internal structure. Corrosion wear-resistant grinding pump) Titanium white carbon black colloid mill, titanium white colloid mill (grinding pump) modified, covered, coated post-processing deep processing equipment. CN.HAOSTAR has revolutionized and innovated in traditional powder sanding technology, achieving high-speed shearing, grinding, dispersing, emulsifying, mixing, homogenizing, homogenizing, and beating.

Pipe grinding effect: glass glue category Acid glass glue restrictions

Acidic silicone glass glue can corrode or not bond copper, brass (and other copper-containing alloys), magnesium, zinc, electroplated metals (and other zinc-containing alloys), and is recommended for brick and stone materials and carbon carbide substrates. Do not use acid glass glue. It is not good to use this product on materials made of methyl methacrylate (PLEXIGLAS), polycarbonate, polypropylene, polyethylene and TEFLON (Teflon, Teflon). Bonding effect and good compatibility. It is not suitable to use acid glass glue for moving more than 25% of the joint width. It is also good to use ordinary acid glass glue (except for acid structural glue) on structural glass, and should not be used in areas where there is abrasion and physical disadvantages. Use acid glass glue. It is not suitable for the surface temperature of the substrate of silicone acid glue to exceed 40 °C. It is not suitable for the surface temperature of the base material of the silicone structural adhesive to exceed 40 °C.